The Boot Configuration Data Store Could Not Be Opened

A simple explanation for this issue is that the command was unable to locate the boot configuration data store on its own. A Fat32-formatted EFI partition is not present on the hard drive of the partition that the boot configuration software is attempting to access. Any time you run bcedit.exe, you’ll see the message that follows:

The Boot Configuration Data Store Could Not Be Opened

In this SEO-optimized article, we delve into the critical but often misunderstood topic of Boot Configuration Data Store (BCD) in Windows operating systems.

You’ll learn what BCD is, what causes the “Boot Configuration Data Store Could Not Be Opened” error, and why you might see messages like “Boot Configuration Data is missing.” if you want to solve your problem easily so please read the our fully The Boot Configuration Data Store Could Not Be Opened article. please continue reading!

What is Boot Configuration Data Store?

The Boot Configuration Data Store, commonly referred to as BCD, is a firmware-independent database file that holds crucial data required for successfully booting a Windows operating system.

This system was introduced to replace the boot.ini file, which was used in older versions of Windows. The BCD store contains various parameters that guide the boot-up process, including paths to system files, boot loaders, and the display order for operating systems on multi-boot systems.

Causes of “The Boot Configuration Data Store Could Not Be Opened” Error

If you encounter this daunting message, it typically indicates a problem with accessing or reading the BCD file. Here are some common causes:

1. Corrupt BCD File

Corruption in the BCD file is one of the most common causes. This could be due to abrupt shutdowns, hardware failures, or malware attacks.

2. Inaccessible Boot Drive

If the drive containing the BCD file becomes unreadable due to hardware issues or file system corruption, you’ll likely encounter this error.

3. Software Conflicts

Certain third-party software or system utilities that interfere with boot processes can trigger this issue.

4. Incorrect Disk Partitions

If disk partitions are not correctly configured, the system may have trouble locating the BCD store.

5. Windows Update Issues

Sometimes, the error occurs post a failed or partial Windows update, which could interfere with the BCD file.

Unable to Access the Boot Configuration Data Storage

Explore the following alternatives to see which one is best for you:

Run the following command in CMD as an administrator:

  • “TheNameYouWant” as the current description in bcdedit.

Go to a high CMD level:

c:BootBCD /store bcdedit /

  • There are many options available to you in this section.
  • To get started, simply follow these instructions:
  • C:BootBCD/set bootmenupolicy Legacy is what you need to do.
  • Select Windows and press F8 as soon as the computer restarts.

Read Also:

  1. No Man’s Sky Failed To Join Lobby
  2. How To Fix Error 31 Other Network Problem
  3. An Unexpected Error Has Occurred Netge-1000

Change the Mode of Operation at the Beginning.

In order for BCDEdit to function properly, you must boot the computer from the same partition that was used to create the disc, as has been noted by a few worried users. Changing the BIOS mode is the quickest way to accomplish this.

This is done through the BIOS settings, however it differs from computer to computer depending on the motherboard manufacturer and the BIOS version it contains.

Restart the Computer and Perform a Fresh Installation.

Reinstalling Windows 10 is the only option if all of the aforementioned procedures fail on your machine. However, even though reinstalling Windows can be a pain, it can be beneficial.

Your system files can be erased and you’ll have to start again if you have to reinstall your operating system. As a result, we urge you to create a backup of your data before proceeding with a system reinstallation.

Read Also:

  1. How To Fix CE 32895 7
  2. Make: *** No Targets Specified And No Makefile Found. Stop.
  3. Your Computer Appears To Be Correctly Configured But The Device Or Resource Is Not Responding

Troubleshooting of the BCD

As a result of these issues, your computer will no longer be able to start. As a result, you’re unable to use programmes like Visual BCD Editor to fix the issue on the affected PC.

It’s best to start Windows in safe mode and then run many instructions from the command line in order to fix most problems. You can access the recovery options if you have Windows installation support. For Windows 10 users, Microsoft provides a media download option.

Why “Boot Configuration Data is Missing”?

A “Boot Configuration Data is Missing” error usually occurs for the following reasons:

1. Deletion or Modification

If you’ve accidentally deleted or modified the BCD file, it would naturally lead to this error.

2. Disk Errors

Errors in the disk where the BCD file is stored can make it unreadable, causing this error message.

3. Dual Booting Conflicts

If you’re running multiple operating systems on the same computer, incorrect configuration can result in missing BCD data.

4. Faulty Data Cables

Sometimes, hardware issues like faulty data cables connecting the hard drive can also cause the BCD to go missing.

How to Fix BCD Errors

1. Rebuild BCD

Using command prompt in Windows recovery environment, you can use commands like bootrec /rebuildbcd to rebuild the BCD.

2. Repair Disk Errors

Run disk checking utilities to repair the boot drive, which can sometimes resolve BCD issues.

3. System Restore

Rolling back to a previous system restore point can sometimes fix BCD errors, especially if they’re due to recent changes to your system.

4. Reinstallation

As a last resort, reinstalling Windows will create a new BCD store, eliminating any issues with the existing one.


Understanding Boot Configuration Data Store and how it impacts your Windows booting process can save you from hours of frustrating troubleshooting.

Knowing what leads to errors like “The Boot Configuration Data Store Could Not Be Opened” or “Boot Configuration Data is Missing” and how to fix them is crucial for maintaining a healthy system.

With a little knowledge and some careful troubleshooting, you can overcome these boot-related issues and keep your PC running smoothly. thanks for read the our fully The Boot Configuration Data Store Could Not Be Opened article.

Happy Reading!