How To ‘Reset Samsung Remote’ Through The Different Methods

Experiencing issues with your Samsung TV remote can be a minor hindrance in your entertainment experience. Fortunately, resetting your Samsung remote is a quick and straightforward process.

This article will guide you through the steps to reset your Samsung remote, ensure its safety, and outline its benefits. Additionally, we’ll provide tips for fixing an unresponsive remote and resyncing it with your TV.

Older Samsung TV remotes are durable and reliable, but like all technology, they can occasionally run into problems.

Reset Samsung Remote

Whether your Samsung Smart TV remote is not working or you’re encountering specific issues with functionality, this guide will help you reset your device and troubleshoot common problems effectively.

Step-by-Step Guide to Reset Your Samsung Remote

Resetting your Samsung remote can resolve issues such as unresponsiveness or intermittent functionality. Here’s how to perform a basic reset:

  1. Power Off the TV: Start by turning off your television manually.
  2. Remove Batteries: Take the batteries out of the remote control.
  3. Press Power Button: Hold down the power button on the remote for about 8 seconds to discharge any residual power.
  4. Reinsert Batteries: Place the batteries back into the remote control.
  5. Power On the TV: Turn the television back on using the remote.

How to Reset Samsung TV Remote [Older Models]

If you have an older model Samsung TV and the remote starts to malfunction, a simple reset can often be the solution. Here’s how to reset it:

  1. Power Off Your TV: Turn off your Samsung TV manually.
  2. Remove the Remote’s Batteries: Open the battery compartment and take out the batteries.
  3. Press and Hold Power: With the batteries out, press and hold the power button on the remote for about 20 seconds.
  4. Reinsert the Batteries: Put the batteries back into the remote.
  5. Test the Remote: Try turning on your TV with the remote to see if the reset was successful.

How to Fix Samsung Smart TV Remote Not Working

When your Samsung Smart TV remote stops working, perform the following checks:

Check the Remote Signal

Ensure the remote’s infrared signal is not obstructed. Clean the sensor’s lens on both the remote and TV, and check for any obstructions that might block the signal.

Change the Batteries

Weak or depleted batteries are the most common cause of remote control issues. Replace them with new ones, ensuring they are inserted according to the correct polarity.

Remove Obstacles

Make sure there are no obstacles between the remote and the TV sensor. Even transparent objects can sometimes disrupt the infrared signal.

Buttons Not Working

If some buttons are unresponsive, it could be due to dirt or stickiness. Gently clean the remote’s buttons with a soft, damp cloth. If the problem persists, the remote might need professional repair or replacement.

How to Reset the Samsung Smart TV Without the Remote

In situations where your remote is lost or completely non-functional, you can still reset your Samsung Smart TV:

  1. Locate the Power Button: Find the physical power button on your TV; it’s usually located on the back or underside of the screen.
  2. Long Press: Press and hold the power button for about 5 to 10 seconds. This action can simulate a ‘soft reset’.
  3. Disconnect Power: If the soft reset doesn’t work, unplug the TV from the power source, wait about 30 seconds, and then plug it back in.

For a full factory reset, you’ll typically need access to the on-screen menu, which may require a universal remote or a smartphone with an IR blaster and compatible TV remote app.

Is Resetting Your Samsung Remote Safe?

Resetting your Samsung remote is entirely safe and part of standard troubleshooting procedures recommended by the manufacturer. It does not harm the remote or the television and can be done as often as needed.

Benefits of Resetting Your Samsung Remote

  • Restores Functionality: A reset can fix temporary glitches and restore full functionality to your remote.
  • Simple Solution: It’s a quick first step before moving on to more complicated troubleshooting.
  • No Technical Knowledge Needed: Resetting your remote doesn’t require any technical expertise.

Fixing an Unresponsive Samsung Remote

If your Samsung remote is still unresponsive after a reset, try these steps:

  • Check the Infrared Sensor: Ensure nothing is blocking the sensor on the remote or the TV.
  • Replace Batteries: Weak batteries are often the cause of remote issues.
  • Check for Interference: Other electronic devices can interfere with the signal. Make sure there are no such devices between the remote and the TV.

Resyncing Your Samsung TV Remote

Sometimes, the remote may need to be resynced with your Samsung TV:

  1. Turn on the TV: Power on your TV with the power button on the device, not the remote.
  2. Simultaneously Press Buttons: On the remote, press the ‘Return’ and ‘Play/Pause’ buttons simultaneously for at least 3 seconds.
  3. Wait for Resync: Your TV should display a message confirming the remote has been paired.

How to Reset Your Remote Control

For a more general approach to resetting any remote control:

  1. Remove Batteries: Take out the batteries from the remote.
  2. Press Each Button: One at a time, press and release each button on the remote to ensure none are stuck.
  3. Reinsert the Batteries: Place fresh batteries back into the remote.
  4. Test the Remote: Try using the remote with the device to see if the issue has been resolved.


A functioning remote is essential for the best viewing experience. Resetting your Samsung remote is a safe and effective way to troubleshoot common issues. Whether it’s a Samsung remote or any other brand, these steps can help you quickly resolve most problems.

If the issue persists, it may be time to contact Samsung support or consider getting a replacement remote.

Most issues with Samsung TV remotes can be resolved with a simple reset or by troubleshooting common problems such as battery failure or signal obstruction.

For older Samsung TV models, these steps can help extend the life of your remote and maintain seamless control over your viewing experience.

If your remote is beyond repair, consider purchasing a universal remote or using a smartphone app as an alternative solution for controlling your Samsung Smart TV.