When a computer is shut down unexpectedly because the processor overheated, the “Processor thermal trip errors” notification displays.
Every computer has its own cooling system to keep the processor from overheating. When the CPU temperature reaches a certain threshold, the kernel is required to power down the computer.
There are a number of potential causes for this error message, but they all point to one core issue: the processor is overheating.
Keeping a CPU cool is essential to the development of computing. The processor’s performance is throttled by the ambient temperature.
Contents
What Causes the ‘Processor Thermal Trip Error’?
As was previously noted, this notice appears only when the CPU is overheating. This could happen for a variety of reasons, including:
- Overclocking raises the temperature of the processor for brief periods of time by increasing its clock speed. This mistake could occur if overclocking isn’t terminated at the proper time.
- The air conditioner is either broken or clogged with dust. When a computer has not been cleaned in a while, this usually happens.
- Either the CPU is not securely fastened to the heat sink, or the thermal paste was not placed correctly. The processor’s installation may have been flawed, causing this.
How Do I Fix Processor Thermal Trip Error?
The automatic PC fan controller speeds can be adjusted to maintain a comfortable operating temperature for your computer.
To regulate the speed of your computer’s fans, read up on the top programmes available. Now, one by one, do what is outlined below:
Solution 1: Checking Ventilating Fans
Making sure your computer is getting enough ventilation is the first step in improving the cooling system.
Your computer will be forced to shut down and display the error “Processor thermal trip error.”
If dust prevents air from reaching the fans or if the computer is not set up to allow for enough ventilation.
Remove any obstructions from the route of air to your computer’s fans by cleaning them. To remove dust from a tower’s air and fan vents, remove the lid.
To manually clean the fans in your laptop, you’ll need to remove the cover. Once you’ve finished dusting off the fans, restart the computer to see whether the problem persists.
Solution 2: Increase the RAM
When you’re trying to multitask between multiple applications, your computer may start to slow down, freeze frequently, and even overheat if you don’t have enough RAM.
To solve this issue, you can increase the RAM to 4GB.
Solution 3: Check Thermal Paste and Heat Sink
If the airflow is adequate but the issue persists, it may be because the thermal paste on the processor was not applied properly.
When combined with the included cooling fan, the thermal paste effectively reduces your processor’s temperature.
However, the agent won’t be able to do its job and prevent the processor from overheating if the thermal paste isn’t placed correctly.
Here’s the procedure for using a thermal processor:
Step 1: Carefully unscrew the bolts to take out the fan that sits atop the CPU.
Step 2: You can clearly observe the cooling agent, giving you peace of mind that you will always have some on hand. To finish, spread the agent over the surface of the computer’s processor and apply.
Step 3: Recover the computer and re-screw the fan onto the top of the processor. Hold off for a while so the cooling agent can do its job.
Step 4: And boot up that pc.
Conclusion
An application called “Core Temp” can be installed to monitor the CPU temperature in real time if this error occurs intermittently rather than constantly.
A temperature reading above 80 degrees would lend credence to our suspicion that something is wrong with the air conditioner.