Cyclic Redundancy Check or simply CRC is a check performed by the file system to check if the source file and the destination file are the same. It checks whether the file is successfully copied or not. Some checksums are generated and then they are compared to see if the files are the same. You might face this issue while copying data from one drive to another.
Two things can be wrong with copying the data:
1. The source file or the Drive on which the file was stored is corrupt. OR, the destination drive is corrupt leading to no match in source and destination files.
2. If the files that gave data error Cyclic Redundancy Check messages are not important, you can delete them permanently and copy the rest of the files.
- 1 How to Fix Cyclic Redundancy Check Data Error
- 2 Conclusion
How to Fix Cyclic Redundancy Check Data Error
Solution 1: Repairing the Whole Drive
Command Prompt can be used to repair the drive using the popular command called chkdsk. Chkdsk is a built-in Windows utility. it is used to check and repair file system error. It also repairs the broken file registry and bad sectors. Follow the steps to repair the drive:
Step 1: Firstly, close all the running programs.
Step 2: Then, open Command Prompt as an administrator.
Step 3: After that, press Windows key + R to open the run option.
Step 4: Type cmd. Press ctrl+ shift+ enter. This opens the command prompt in administrator mode.
Step 5: Type “chkdsk /fd:” without quotes. Replace d: with driver letter of the drive. Then press enter.
Step 6: Now chkdsk utility will run. Now, check for the driver’s errors.
Step 7: After the utility completes the scan and repair, it will display a report about the condition and errors.
There is a high chance of copying the files without the data error Data error (cyclic redundancy check) message popping up. Format the files if there are many errors in the drive.
Solution 2: Recover the Source Files
There are many data recovery software available on the internet. When you delete or move or overwrite a file from any storage device, the special hidden file. It contains metadata about the files and folders simply delete its entry. The recovery software makes use of this. It rebuilds the metadata file, making the deleted or corrupted file available again. You can copy files without the data error Cyclic Redundancy Check message.
Follow the steps given below to recover the files:
Step 1: First of all close all the running programs.
Step 2: Secondly, run the software as Administrator.
Step 3: Select the drive you want to recover files from. Even select the file types you are going to recover.
Step 4: Finally, start recovering after setting the destination. Now you are set.
Solution 3: Format the Corrupted Drive
Formatting the drive will erase everything. So backup all the files before proceeding. Follow the steps given below:
Step 1: Open this PC or Explorer from the Start menu.
Step 2: Right-click on the drive icon you want to format.
Step 3: Click on the Format.
Step 4: Deselect a quick format. In case, you want to clean the drive thoroughly.
Step 5: Choose NTFS if the drive is hard disk or FAT32 in case of pen drives or memory cards.
Step 6: Complete the format.
Solution 4: Renaming the Drive (Assigning A Drive Letter) Iif a Drive Is Not Accessible
You can rename or assign a drive letter to the drive to access it. Follow the steps to assign a drive letter to a drive:
Step 1: First of all, press Windows + R to open run option.
Step 2: Then, type “diskmgmt.msc” in the box. Press enter.
Step 3: Now, the Disk management tool window will open. If you see the drive right-click on it.
Step 4: Following this, select change drive letters or paths.
Step 5: Now, check if there is any drive letter associated. Then select change or select add if there was none.
Step 6: After that, assign a new letter to drive.
Step 7: Lastly, close the windows and reboot.
Solution 5: Check for Bad Sectors on a Hard Disk
If you find the source or destination drive corrupted. Then its time to replace it or get a warranty replacement, if it is still under warranty. To check the bad sectors on a hard disk, use tools like Recuva, Minitool or easeUS.
Follow the steps given below:
Step 1: Firstly, open the tool. Then right-click on the drive you want to scan for bad sectors or damage.
Step 2: Secondly, select the option which resembles like scan for bad sectors.
Step 3: Following that, the large drivers will take a lot of time to scan.
Step 4: Subsequently, if the computer freezes during the scan, wait for a while. But if the frozen stays for a long time then the drive is beyond repair.
- Audio Services Not Responding
- Firefox Not Responding
- What is Inetpub Folder and How to Delete It
If software reports bad drive then try to replace the drive. We hope that the methods given above will help to fix the issue of data error Cyclic Redundancy Check.