AirPlay Not Working on Samsung TV? Here is How to Fix it

These fixes for Samsung TV airplay not functioning are the best you’ll discover anywhere online, and they’re a must-have if you’re a techie at heart.

Apple’s airplay feature has proven to be very helpful for sharing media files between devices. It works by mirroring your primary device’s display on your secondary device.

If the firmware of the TV or the operating system of the host device (such as a Mac) is out of current, Airplay may not work on your Samsung TV.

The issue could possibly be the result of improperly configured Samsung TV settings (including Auto Protection Time, IP Remote, IPv6, etc.).

AirPlay Not Working on Samsung TV

Problems occur when a user attempts to stream material from an Apple device to a Samsung TV but encounters difficulties doing so. Sometimes, Airplay won’t even recognise the Samsung TV.

Methods to Fix AirPlay Not Working on Samsung TV

If you’re an Apple customer who’s run into the problem of Airplay not working on a Samsung TV, the aforementioned are only a few of the numerous potential causes.

You shouldn’t worry too much about what to do because we’ll provide you with reasonable options for dealing with these issues.

If you’re concerned that Apple AirPlay might not be functioning properly on your Samsung TV, conduct a fast test using this basic checklist.

Method 1: Restart Your Samsung TV

This may seem silly, but disconnecting your TV is the easiest way to get AirPlay operating again.

The trick is to wait the full minute.

Wait at least a minute before connecting your TV back in; this will allow the power to stabilise.

Find the power button and hold it down for 30 seconds while the TV is disconnected. If you want to turn on the TV, make sure you’re not holding the remote.

Doing so will help to discharge the TV’s battery and enable a gentle reset. That’s not the same as turning the remote on and off.

Once the 60 seconds are up, plug the TV back in and turn it on; Apple AirPlay should begin streaming once more.

Fixing software issues that could prevent AirPlay from functioning properly on your Samsung TV is usually as simple as restarting the device.

It’s a good idea to reboot your Apple device while you’re at it.

Method 2: Make Sure Devices are on the Same Network

AirPlay requires all devices to be on the same network in order to function. Most modern routers use what are known as “dual-band” radio signals.

With this setup, you may share your home network with another company while still keeping your gadgets separate (either the 2.4 GHz or 5.0 GHz network).

The increased speed and adaptability of two networks are two of their main benefits.

The dual-band setup eliminates the potential for dropped connections and interference while also increasing network stability.

However, if your Samsung TV is connected to the 2.4 GHz network and your Apple device is connected to the 5.0 GHz network, AirPlay may not function properly (for example).

If you want to make sure your Samsung TV and Apple device are communicating, you can do so in a matter of seconds by making sure they are both connected to the same WiFi network.

Simply select the “Source” button on the remote, then navigate to “Settings” (tool icon bottom left).

“Enter,” “General,” “Network,” and finally “Network Status” on your Samsung TV to view the current WiFi connection status.

Conclusion

Amazingly, you can now use your iOS device, Mac, or laptop to wirelessly stream media to your Samsung TV thanks to a feature called AirPlay.

If AirPlay stops playing, does not appear, or does not function, what should you do?

Among other things, updating the firmware on your Samsung TV, making sure AirPlay is turned on, updating the smart devices you’re using to mirror.

And connecting the TV and smart device to the same WiFi can fix problems with AirPlay not working, appearing, or playing.