0xc1900101 When Upgrading or Installing Windows 10

When you try to install or update your operating system to Windows 10, you might face several issues. These are most probably driver errors. When this error occurs on you on your screen, it also shows you an error message with tips to solve or fix Error Code 0xC1900101.

0xC1900101 error can be caused due to various reasons, mainly driver-related reasons. These reasons may include outdated drivers which haven’t been updated to their latest versions, the driver installed are incompatible with Windows 10, etc.

0xC1900101 Driver Error in Windows 10

Many Windows have complained about the 0xC1900101 error while updating to Windows 10 and that they were unable to complete the update. There are categorically different error codes for different types of driver errors.

The different error codes that you might come across while upgrading to Windows 10 are:

0xC1900101 – 0x2000c, 0xC1900101 – 0x20017, 0xC1900101 – 0x30018, 0xC1900101 – 0x3000D, 0xC1900101 – 0x4000D, 0xC1900101 – 0x40017, , 0xC1900101 – 0x20004

The 0xC1900101 errors are fixable, and in this article, we will cover all the ways. Using this, you can try to fix this issue.

How to Fix 0xC1900101 Driver Error in Windows 10

Some of the mentioned solutions may require the administrator’s permission before execution. The following mentioned solutions are explained elaborately step-by-step following which you will be able to execute them.

Solution 1: Update or Uninstall Corrupted Drivers

An old and out-dated driver can be the cause of several system errors. It can also cause a 0xC1900101 error. You can try to detect and remove defective drivers by trying these different methods.

Solution 1.1: Update or Uninstall Corrupted Drivers Manually

To detect corrupted or out-dated drivers manually, follow the below steps –

Step 1: First, open your My PC, This PC or My Computer folder.

Step 2: Then open the C: Drive.

Step 3: Look for the Panther folder in the C: Drive and once you found it, open it

Step 4: Now open Setuperr.log or Setupact.log to find the defective driver.

Step 5: After you have located the corrupted files or folders, uninstall them one by one

Solution 1.2: Update Drivers Automatically

If you do not have the knowledge or skill to fix/update the corrupted drivers manually, then you can take the aid of other tools that will help to fix these defective drivers automatically. You can use these Driver Updater tools.

This software recommended by both Norton Anti-virus and Microsoft. It is considered to be one of the best to fix any driver related issue automatically.

Follow the below steps to update drivers manually:

Step 1: Download any driver updater tool and install it.

Step 2: After the software is installed, the tool will start scanning for an outdated driver.

Step 3: Wait until the scan is completed.

Step 4: After the scan has been completed, you will see the list of all outdated driver

Step 5: Now, you can update them one by one. Right-click on the driver you want to update and select Update Driver.

Step 6: You can also update all drivers at once by clicking on Update all option

Solution 1.3: Detect and Fix Drivers Using Device Manager

The device manager tool is a Windows tool that helps you to keep track of all your drivers, folders, and files.

To find the defective drivers follow the given steps –

Step 1: First, go to the Start Menu.

Step 2: Type in Device Manager in the search bar. After that, open the first result.

Step 3: A list of the drivers on the device will appear in a window.

Step 4: Any Driver that might be causing the 0xC1900101 error will be marked in yellow

Step 5: Now right-click on these defective drivers one by one. Then, select Update Driver Software or Select Uninstall, if you want to remove these drivers.

After removing or updating all the corrupted drivers from your PC, the error should be solved. And now, you will be able to upgrade your system to Windows 10 without any further issues. The Windows Device Manager also can be used to detect corrupted or outdated drivers and fix them automatically, and to do so, all you have to make some changes in your settings.

Solution 2: Unplug All Peripherals

Sometimes significant issues can be solved by using simple measures. Many users who have complained about the 0xC1900101 error confirmed that they were able to upgrade their operating system to Windows 10 after they unplugged all of their peripherals from their PC.

This might not look like an effective way to solve the issue, but there is no harm to try this method if it can fix the problem in hand. This method has been claimed to be useful by many Windows users.

First, you should unplug all the plugged-in peripheral devices. After that, start your PC. After the PC is started, you should be able to upgrade the operating system to Windows 10.

Solution 3: Remove Additional RAM or Your Network Card

If the methods mentioned above haven’t worked yet, then the issue behind the error wasn’t a faulty driver or peripheral device. Your additional RAM module device might sometimes cause this error. The extra RAM specifically causes the 0XC1900101-0x20017error. To solve this problem, you have to conduct some simple changes.

First, remove the extra RAM module. Then try to restart your PC. Now you can upgrade to Windows 10. You can also try to fix the problem by removing your network card from your computer. If you are still unable to fix the 0XC1900101 error, then try the other methods mentioned below.

Solution 4: Use the Media Creation Tool

If you are still unable to fix the 0XC1900101 error, then you can give the Media Creation Tool a try to complete the upgrade to Windows 10. You can download the Media Creation Tool from the Windows Store of the Windows Upgrade Page.

Along with the tool, you will also find the step-by-side guide to complete the upgrade process.

Solution 5: Run an SFC Scan

Sometimes your windows registry could be corrupted with damaged or virus-infected files. Independent tools and software such as Microsoft’s system file checker or CCleaner help you to check for the registry for damaged or corrupted files, and it also verifies the integrity of all the files in your system. These tools don’t just scan for the file/files causing the issue but also helps you to repair them.

To repair your registry, you can follow the given steps:-

Step 1: First, to open the Quick Access Menu press on Windows Key + X.

Step 2: Now select the Command Prompt (Admin) option OR the PowerShell (Admin) option.

Step 3: Type snannow/sfc command and Hit Enter.

Step 4: After this, the SFC scan will be started. It might take some time. Do not interfere in the process.

After the scan is over, check the bug is fixed or not. If you are unable to access the command Prompt as the admin, then try to find other ways to access the Command prompt as admin, on the internet.

If the problem is not solved yet, then you can try and remove or repair damaged system files by using the Microsoft Windows Development Image Servicing and Management (DISM)tool.

To fix the problem using DISM follow the below steps –

Step 1: First go to the Start Menu.

Step 2: Type in Command Prompt or cmd.exe in the search bar. Following this, open the first result.

Step 3: Type DISM.exe/Online/Cleanup-image/Restorehealth command and press Enter.

Step 4: This process will take more time to complete than the SFC scan. Do not interfere in the process.

Solution 6: Check your Available Upgrade Space

To install the Windows 10 operating system on your computer, you need at least 16 GB of memory. But if there isn’t this much space in the PC, then you will be unable to fix the issue and install Windows 10. So you need free some space on your computer to successfully upgrade to Windows 10.

If you to clean up your hard drive’s memory without losing any important file or folder, then you can use different disk Cleanup tools to wipe out the unnecessary junk data and file hogging up your computer’s memory.

You can follow the below instructions to clean out junk files from your computer:-

Step 1: First to open the File Explorer press the Windows keys and E at the same time.

Step 2: Now the list of all the drives will open.

Step 3: Then right-click on each drive and select Properties from the drop-down menu.

Step 4: From the Properties window, select Disk Cleanup.

Step 5: After that select the junk files to be removed and click on OK.

Step 6: Lastly click on the Clean up system files button.

There are few tools available on the internet that can help you remove junk files regularly automatically. Auslogics BoostSpeed is one of the most well-known software for this task.

If this doesn’t help to free up much space on your hard drive, then you can disable the Hibernation mode. Doing this, you can save the state and save power at the same time. And this doesn’t affect the other files or programs.

There might be some programs on your computer that you don’t use anymore. To free more space, you can uninstall the programs that you don’t use anymore. These programs might be taking up a lot of space, and uninstalling them can solve your problem.

To uninstall these programs you can follow the below steps:-

Step 1: First, go to Windows or start menu.

Step 2: Then type in Control Panel in the search bar and then hit Enter.

Step 3: Open the first one in the search result.

Step 4: From under the Programs category, select Uninstall a Program.

Step 5: Select the programs that you do not use anymore and right-click on them.

Step 6: Lastly, click on Uninstall from the list.

Solution 7: Remove your Antivirus

The 0xC1900101 error might be caused by your installed antivirus tool. In this case, it is best to uninstall the antivirus tool and install the antivirus again after you have upgraded to the Windows 10 OS. Learn how to disable the Avast Antivirus.

A 3rd Party anti-virus can also be the reason behind this error. For that, you should also do the same, uninstall and re-install this after the upgrade is completed.

If you are using tools like the Norton anti-virus or the McAffe anti-virus, then you’ll find the guide to uninstall these tools from your computer within the programs itself.

You can follow the below-given steps to turn off any 3rd party anti-virus on Windows:-

Step 1: Search the Windows notification area to locate the anti-virus program icon.

Step 2: After you have located the icon right-click on the same.

Step 3: A small list of options will appear on the screen.

Step 4: Now select disable/shut down or any similar option available on the list.

There are also some tools available on the internet that helps you to uninstall tools or software from your PC. It is advisable to download and use these tools if you are unable to uninstall the anti-virus by yourself.

Solution 8: Disable your LAN card in BIOS

We have already discussed that external peripheral devices cause 0xC1900101 error. Sometimes the Ethernet Adapter also causes this problem. Mostly the wireless adaptor that you are using on your computer is the leading cause.

When the error is a result of your Ethernet Adapter, then you can disable your Local Area Network or LAN from the BIOs.

Follow the below instructions to disable your LAN card in BIOS:-

Step 1: First, go to the Start menu.

Step 2: Then, open Settings from the menu.

Step 3: After that, open the Control Panel.

Step 4: From Control Panel, open System window.

Step 5: Select the Hardware option from the System Window.

Step 6: Now open the Device Manager.

Step 7: Select the Network line you want to manage.

Step 8: Right-click on the Wireless Network line.

Step 9: Lastly, select the remove/disable option.

Solution 9: Upgrade your BIOS

Outdated BIOS is the main reason behind this issue. Many users reported that the BIOS interferes with the Windows 10 upgrading process, after updates. You can update the BIOS to fix your 0xC1900101 error.

Follow this process correctly. Otherwise, it can turn out to be very dangerous for your computer system. So, try do follow proper steps to complete the process or take guidance from someone while Upgrading your BIOS.

0xC1900101error is a very serious issue. It should not be taken lightly or left as it is. Doing so will prevent you from upgrading your Windows PC to any newer versions.

Solution 10: Uninstall the 3rd Party Applications

Many Windows users have complained some 3rd party applications can be the cause behind the 0xC1900101 error. Especially applications like Trusteer Rapport and Acronis True Image stand as the significant interference in the Windows 10 upgrading process.

You can uninstall these programs and all other similar programs to make sure you can complete the upgrading process error-free. Hopefully, after trying this method, your problem will be solved. And if this does not fix the bug, then give the rest two methods a try.

Similar Posts:

Conclusion

The solutions that have been listed above are constructive. You can fix the 0xc1900101 error by trying these. It is advisable to try the methods one-by-one and check after every attempt if it solved the issue or not.

If, even after trying all the methods, you are unable to fix the 0xc1900101 error. Then, we highly recommend you to seek guidance from an expert or just from someone with more knowledge on the matter.